manualshive.com logo in svg

SATO S84NX, Operator'S Manual, Page: 471 / 588

Share
Download
SATO S84NX Operator'S Manual Download Page 471

471

Operating the Notification Screen of the SOS (SATO Online

Services) On-Demand Mode (SOS users only)

In the SOS (SATO Online Services) function, the product information is sent to the SOS cloud and

monitored and managed.
The status icon 

 and the notification screen appear at the time specified when [SOS Mode] is

set to [On-Demand] in the [Interface] > [Network] > [Services] > [Online Services] menu and [Periodic

Notification] is enabled on the product. A QR code with the product information is displayed on the

notification screen. You can send the product information to the SOS cloud by scanning the QR code

with a tablet or a smartphone.
The following shows how to operate the notification screen.
The soft key function changes according to the setting of [Update Screen].

When [Update Screen] Is Set to [Normal]

By pressing the 

 button, the display returns to the Offline screen without resetting the QR

code for periodic notification.
The status icon remains 

.

By pressing the 

 button, the QR code for periodic notification is reset and the display returns

to the Offline screen.
The status icon changes to 

.

When [Update Screen] Is Set to [Print]

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments