Sapido WE-1530 User Manual Download Page 71

Page: 71 / 308

MAC Filter Action:

To deny or allow all MAC filter action.

Enable MAC Filter:

Check enable or disable to apply MAC Filter function.

Enable Log:

All packets between WAN and LAN will be logged.

Description:

Enter the filter description into this blank.

MAC Address:

Enter the MAC address manually that you want to filter.

Time Ranges:

Apply MAC filter by setting time ranges.

Add, Apply & Cancel:

After finish the above, click

Add

button to create the

MAC configuration rule and add the settings into the list table. Click on

Apply

button to save and

Cancel

button to clear the settings on this page.

MAC filter list:

Shows all filtered MAC information for administrator to edit or

delete.

Summary of Contents for WE-1530





















































































































































































































































































































Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands

Sapido WE-1530, User Manual

Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands