226
1.
Link Mode:
Select
Infrastructure/Ad_hoc
to enable wireless.
2.
RTS Threshold:
This value should remain at its default setting of 2347. If you
encounter inconsistent data flow, only minor modifications of the value range
between 256 and 2347 are recommended
3.
Frag Threshold:
To identify the maximum length of packet, the overflow
packet length will be fragmentized. The allowed range is from 256 to 2346, and
default length is 2346 bytes. Only minor modifications of the value range are
recommended here.
4.
SSID:
Name your wireless network, and the default is previously selected
wireless AP.
5.
bg Mode:
This field indicates the 802.11g interface mode.
802.11g
prevents
the 802.11b clients from accessing the router;
802.11b
provides 802.11b
standard wireless network. By default, the value is
bg Mixed
, which allows
both 802.11b and 802.11g clients to access the router.
6.
Rate:
Select the transmission rate up to 54Mbps for the network. The default
setting is
Auto
.
7.
Channel:
NES Storage Server with BT supports up to 14 overlapping channels for
radio communication (For the US and most of Europe, channel 1, 6 & 11 are
used.) By default, the channel is
Auto
.
8.
Obtain IP Automatically:
Check to allow system automatically obtaining IP.
9.
Specify an IP:
Put in the required information as specified upon your demand.
10. Encryption:
Include 4 options of
Open System
,
Shared Key
,
TKIP
and
AES
.
Open System & Shared Key
WEP Encryption
NES Storage Server with BT supports both 64-bit and 128-bit encryption using the Wired
Equivalent Privacy (WEP) algorithm. Select the type of encryption you want to use (64 or
128 bit) and configure one to four WEP Keys. The “1280bit” method is more secure than
the “64-bit”.
Key Type:
For 64bits WEP key, either 5 ASCII characters or 10 hexadecimal digitals
leading by
0x
can be entered. For 128bits WEP key, either 13 ASCII characters or 26
hexadecimal digits leading by
0x
can be entered.
Note: 128 bits WEP is most secure, but has more encryption/decryption overhead. Note that all
wireless devices must support the same WEP encryption bit size and have the same key. Four keys
can be entered here, but only one key can be selected at a time. The keys can be entered in ASCII
or Hexadecimal. Select the item from drop-down list you wish to use.
Summary of Contents for WE-1530
