Sapido WE-1530 User Manual Download Page 128

Page: 128 / 308

128

™

Delete Photos

: check to select the photo you want to delete.

™

View

: check the photo first and then click to enlarge for better or detailed viewing.

Click

Main Menu

on the menu bar, the web page goes back to the main

page of user’s album, as shown below.

™

Rename Album

: click and fill in if you wish to rename your album.

™

Delete Album

: check and click, the selected album will be removed immediately.

™

Set Desciption

: click to add more of your notes on the album.

After finishing

My Album

setups, click Main Menu to go back the main page

of Personal Application

3.10.5 My Blog

“

My Blog

” indicates personal blog site providing the wizard to help users easily and

quickly set up their own blogs.

Click

My Blog

to enter the main page as the example below. And follow the instructions

to set up.

Summary of Contents for WE-1530





















































































































































































































































































































Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands

Sapido WE-1530, User Manual

Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands