Sapido WE-1530 User Manual Download Page 123

Page: 123 / 308

123

“

My Download

” provides users to add download schedule immediately or by appointed

time. Downloaded data can be stored into FTP Anonymous folder, Samba folder or

Personal folder respectively. The illustrated below is for your reference.

Click

My Download

to open the setup page showing the required information and user’s

download list.

Schedule Name:

Fill the name in the blank.

Source URL:

Fill in the blank which indicates the route of downloading

website.

Directory/Files:

Choose

save

Only

Files

Included

Sub-directories

Remote Login Account:

Select to log in as

Anonymous

Specific User

User Name:

Fill the name in the blank.

Password:

Fill the password in the blank.

Summary of Contents for WE-1530





















































































































































































































































































































Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands

Sapido WE-1530, User Manual

Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands