Sapido WE-1530 User Manual Download Page 246

Page: 246 / 308

246

2. 5.5.5 Printer Server

Follow the illustrations below to set up your NES Storage Server with BT and

USB-connected printer.

12. Enable Printer Server:

Check enable for applying printer server.

13. Enable Printer Access From WAN:

Allow printer can access from WAN side

by checking enable for this item.

14. Printer Model:

The printer model shows up while plugging a USB printer.

15. Printer Name:

Enter the preferred name of your printer.

16. Printer Description:

Enter the description of printer as your demand.

17. Apply & Cancel:

Click

Apply

to continue or

Cancel

to clear the settings on

this page.

Besides finishing the above, the printer setting on PC also needs to be set as follows.

1. 5.5.5.1 Printer Setting on PC

After enabling Printer Server in Quick Setup and Printer Server Configuration, please

Summary of Contents for WE-1530





















































































































































































































































































































Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands

Sapido WE-1530, User Manual

Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands