Sapido WE-1530 User Manual Download Page 34

Page: 34 / 308

otherwise, select

No Default DNS Server

Click on

button to go on

3.3.2 LAN Setup

on page 31.

3.3.1.4 WAN Type – PPTP

This option is typically used for DSL services. Some DSL service providers supply a

special DSL modem. This kind of modem only supports the PPTP tunnel to access the

Internet, you should create a PPTP tunnel that carries a PPP session and terminates on

the DSL model. Once the tunnel has been established, this kind of DSL modem will

forward the PPP session to the ISP. As long as the PPP session is connected, all the local

users will be able to share this PPP session to access to the Internet. If ISP provided you

DNS information, please select

Specify DNS Server IP

; otherwise, select

No Default

DNS Server.

Summary of Contents for WE-1530





















































































































































































































































































































Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands

Sapido WE-1530, User Manual

Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands