Sapido WE-1530 User Manual Download Page 14

Page: 14 / 308

1.4 System Requirements

To begin with NES Storage Server with BT, you must have the following minimum system

requirements. If your system can’t correspond to the following requirements, you might

get some unknown troubles on your system.

XDSL/Cable Modem and broadband Internet Account.

One Ethernet (10 BASE-T or 10/100 BASE-TX) network interface card.

TCP/IP and at least one web browser software installed (E.g.: Internet Explorer 5.0,

Netscape Navigator 7.x, Apple Safari 2.0.3 or higher version).

At lease one 802.11g (54Mbps) or one 802.11b (11Mbps) wireless adapter for

wireless mobile clients.

Recommended OS: Win2000 or WinXP / Linux.

1.5 Get Your IP Automatically & Manually

After NES Storage Server with BT connected with your computer, please make sure your IP

is in the automatic IP position or you adjust it manually in order to activate the Internet

network from home to Internet. If you don’t know how to enter the settings, please follow

the steps as below.

Summary of Contents for WE-1530





















































































































































































































































































































Search results

Summary of Contents for WE-1530

Reviews:

Related manuals for WE-1530

Brands by name

Popular brands

Sapido WE-1530, User Manual

Search results

Summary of Contents for WE-1530

Reviews:

Related manuals for WE-1530

Brands by name

Popular brands