Sapido WE-1530 User Manual Download Page 183

Page: 183 / 308

183

4.6.4 Profile Save

To back up the current configuration setting or load the backup data, also you can restor

NES Storage Server with BT to default setting by this function.

Save Settings To PC:

Click on

Save

button for saving the configuration

setting into assigned location.

Load Settings From PC:

Click on “

Browse…

” button for searching the saving

configuration from hard drive, and then click on

Load

button to load all the

settings into the router.

Restore To Factory Default Settings:

After you have tried other methods for

troubleshooting your network, you may choose to restore NES Storage Server with

BT to the factory default settings.

Apply:

Click on

Apply

button to save the settings.

Summary of Contents for WE-1530





















































































































































































































































































































Search results

Summary of Contents for WE-1530

Reviews:

Sapido WE-1530, User Manual, Page: 183 / 308

Search results

Summary of Contents for WE-1530

Reviews: