Sapido WE-1530 User Manual Download Page 52

Page: 52 / 308

which the Internet connect is maintained during inactivity. If the connection is inactive

for longer than the defined Idle Time, then the connection will be dropped. Either set

this to zero or enable Auto-reconnect to disable this feature.

DNS

: If ISP provides you DNS information, please select

Specify DNS Server IP

and

input the DNS information into the blank; otherwise, select

No Default DNS Server

10. Apply & Cancel

: Click on

Apply

button to continue. Click on

Cancel

button to clear

the setting on this page.

Summary of Contents for WE-1530





















































































































































































































































































































Search results

Summary of Contents for WE-1530

Reviews:

Related manuals for WE-1530

Brands by name

Popular brands

Sapido WE-1530, User Manual

Search results

Summary of Contents for WE-1530

Reviews:

Related manuals for WE-1530

Brands by name

Popular brands