Sapido WE-1530 User Manual Download Page 140

Page: 140 / 308

140

For Gateway IP Address, the IP address 192.168.1.xxx (xxx can be any number between

1 and 253 that is not used by another device.) Please don’t change the default LAN IP

settings at this section until after you have completed the rest of the configurations and

confirm that your Internet connection is working. And the DHCP Server will automatically

allocate an unused IP address from the IP address pool to the requesting computer; which

means you must specify the starting and ending address of the IP address pool, and the

DHCP Router’s address must be identical to the LAN IP’s IP address.

Click on

button to proceed.

The default IP address

Summary of Contents for WE-1530





















































































































































































































































































































Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands

Sapido WE-1530, User Manual

Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands