Sapido WE-1530 User Manual Download Page 149

Page: 149 / 308

149

IP Address

The default value of LAN IP address is

192.168.1.254

for this

router.

IP Netmask

Fill in Subnet Mask, normally it is

255.255.255.0

IP Gateway

Fill in with the default gateway address. If you don’t know,

please check your ISP.

DHCP

: :

Enable or disable DHCP services. DHCP server will automatically

allocate an unused IP address from the IP address pool to the requesting

computer if enabled.

Start IP

This field specifies the first address in the pool to be assigned by

DHCP server in your local network. The default setting is 2.

End IP

This field specifies the last address in the pool to be assigned by

the DHCP server in your local network. The default setting is 253.

Advanced

Enable the advance setting and then set up the Router, DNS

and WINS value.

1. Router

This field indicates the IP address of DNS to provide to clients that

request IP Address from DHCP Server, the default setting is the same with LAN

IP address.

Summary of Contents for WE-1530





















































































































































































































































































































Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands

Sapido WE-1530, User Manual

Search results

Summary of Contents for WE-1530

Reviews:

Brands by name

Popular brands