SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 105 / 176
13. DO relay output
13.1 Relay No. and parameter setting
▶
When the state created during operation is output to the I/O relay board, the relay No. corresponding
state is set.
▶
Relay No. 13 ~ 32 can be used for I/O2 BOARD option addition.
13.1.1 Inner signal/Time signal relay setting screen
▶
When the set relay No. is overlapped, the relay is operated (“OR” condition) if any signal out of the set
signals is output.
①
It sets the relay of the inner signal. (IS1∼IS8)
②
It sets the relay of the time signal. (TS1∼TS8)
③
It moves from present screen to the next screen.
Table 13-1. Inner signal/time signal relay setting screen parameter
Parameter
Setting range
Unit
Initial data
Inner signal 1 ~ Inner signal 8 relay
0~32
ABS
0
Time signal 1 ~ Time signal 8 relay
0~32
ABS
0
[Fig. 13-1] Inner signal/Time signal relay setting screen
①
③
②
Summary of Contents for 3ch series
Page 1: ...Instruction Manual ...
