Samwon Tech 3ch series, Instruction Manual

Page: 96 / 181

SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 92 / 176
▶ It is a screen to select the place of decimal point.
Table 11-1. Sensor input setting the 1
st
screen parameter
Parameter Setting range Unit Initial data
Sensor group T/C, RTD, DCV ABS T/C
TC-K1, TC-K2, TC-J, TC-E,
TC-T, TC-R, TC-B, TC-S, TC-L,
TC-N, TC-U, TC-W, TC-PLA,
TC-C
ABS
TC-K2
(When sensor group is T/C.)
PT A, PT B, PT C, PT D,
JPT A, JPT B
ABS
PT A
(When sensor group is RTD.)
Sensor type
0.4~2.0V, 1~5V, 0~10V,
-1~20MV, 0~100MV
ABS
0.4~2.0V
(When sensor group is DCV.)
℃, ℉ ABS ℃
Display unit
℃, ℉, SPACE, %, Pa, kPa, %RH,
mV, V, Ω, Torr, Kgf
ABS
℃
(When sensor group is DCV.)
Decimal point 0 ~ 3 ABS
1
(When sensor group is DCV.)
Thermocouple display T/C, TC+RJC, RJC ABS
TC+RJC
(When sensor group is T/C.)
Upper limit range EU EU(100.0%)
Lower limit range
EU(0.0 ~ 100.0%)
Lower limit range < Upper limit
range
EU EU(0.0%)
Input calibration EUS (-100.0 ~ 100.0%) EUS EUS(0.0%)
Sensor filter 0 ~ 120 SEC 초 0
SCALE upper limit ℃
100.0
(When sensor group is DCV.)
SCALE lower limit
-199.9 ~ 3000.0℃
SCALE lower limit < SCALE upper
limit
℃
0.0
(When sensor group is DCV.)
* The upper limit/lower limit for the sensor group, sensor type, upper limit.lower limit of the scope, display unit
scale upper limit/lower limit cannot be changed during operation.
[Fig. 11-9] Decimal point setting screen (In case of DCV setting)