SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 118 / 176
14.2 Communication environment setting (Ethernet)
▶
Conditions of Ethernet communication are set.
▶
RS232C/485 communication is provided as a basic and RS232C/485 communication is not usable in
case of using Ethernet option.
▶
The serial communication using RS232C/485 is not available in case of Ethernet communication
selection
▶
When DHCP is not used in Ethernet setting, it can be used when IP address, subnet mask, gateway are
set. Refer to [Fig. 9-7 Ethernet DHCP no use screen]
▶
Network setting is made automatically when DHCP is used in Ethernet setting.
①
Setting Y/N for IP auto setting use in network
②
Manual setting of net work IP
③
Use to apply the changed conditions of Ethernet related parameters
④
Message box
☞
Ethernet apply: In case of
operation
☞
Ethernet ready: Ethernet normal operation
☞
Connection error: No connection of Ethernet cable or in failure
☞
Ethernet apply-RESP.ERR: Ethernet communication failure
Table 14-2. Communication setting screen (Ethernet) parameter
Parameter
Setting range
Unit
Initial data
DHCP
Operation
Non-use, Use
ABS
Non-use
IP address
1 ~ 255
ABS
192.168.0.100
Subnet mask
1 ~ 255
ABS
255.255.255.0
Gateway
1 ~ 255
ABS
192.168.0.1
[Fig. 14-3] Communication environment setting screen (Ethernet)
①
②
③
④
Summary of Contents for 3ch series
Page 1: ...Instruction Manual ...
