SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 42 / 176
3.4 Auto tuning screen
▶
The auto tuning method is categorized into SEG PID type and zone PID type.
▶
The auto tuning hold and step key cannot be used during program operation.
3.4.1 Auto tuning (SEG PID type)
▶
The SEG PID type process the auto tuning based on the currently setting data and the tuning data is
saved into “PID No.” set in the parameter.
▶
The currently setting data becomes the auto tuning setting data during auto tuning operation.
☞
The SEG is held during program operation.
▶
The operation is made in currently setting data during auto tuning termination.
☞
The SEG is processed during the program operation.
①
It sets the PID No.
☞
The tuning data is saved in selected No. at the completion of auto tuning.
Table 3-3 Auto tuning (SEG) parameter
Parameter
Setting range
Unit
Initial data
Auto tuning
OFF, 1 ~ 6
ABS
OFF
[Fig. 3-17] SEG PID auto tuning screen
①
Summary of Contents for 3ch series
Page 1: ...Instruction Manual ...
