Samwon Tech 3ch series, Instruction Manual

Page: 34 / 181

SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 30 / 176
2.3.2 Setting data input method.
▶ The input data used in product is set by the setting data input key, test name input key and time signal
input.
▶ When button in [Table 2-1] is pressed, the setting data input key is appeared, the data to be set
can be input.
▶ Refer to [5.4 Time signal operation] for time signal input key.
▶ Function and explanation of setting data input key
① It displays the "Parameter."
② It displays the “Setting range.".
③ When the setting range is out of the “Setting data display window", the error message (“LIMIT ERROR”)
is displayed.
④ It is used when it returns to the original screen after stopping the input.
⑤ It returns to the original screen after saving the input data.
⑥ It is used to input the decimal point.
⑦ It is used to input the sign (+/-).
⑧ It is used to change the input data, the input data is erased by a single character.
⑨ It is used to erase all input data.
⑩ It displays the previously input setting data.
Ex) Setting data input method
▶ The method to change the setting data 49.4 into -12.5 is as follows.
→ Press the setting data input button on the corresponding screen.
→ Press the corresponding figures (①→②→③→④→⑤) in sequence, and press “ENTER” key(⑥)
finally.
①
②
③
④
⑤
⑨ ⑧ ⑦ ⑥
②
① ④ ⑥
③
⑤
⑩