SAMWONTECH
2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 27 / 176
2.2 Setting button operation
▶
Basic setting buttons are shown in [Table 2-1].
Table 2-1. Basic setting button
Button type
Button operation
Touch the ‘Setting Data” in the stationary stop/operation screen
and it is used for setting the wanted setting data by the user.
The “Pattern No.” part shall be touched in the program still
screen and it is used for setting the wanted pattern No. by the
user.
It is used for inputting the general number and name.
It is used for selecting one of the many types.
It is used for setting the segment operation time and etc.
It is used for selecting one of 2 ~ 3 parameter settings.
(ON state / OFF state / Inactive state)
It is used for selecting the use or non-use of the corresponding
parameter.
(ON state / OFF state / Inactive state)
It is used for general screen conversion.
It is used for the increase and reduction of the page on the same
screen.
It is used for the page conversion by the increase or reduction of
the time axis on the same screen.
It moves to the beginning and end of the PV graph page
displayed on [6.2 Measurement data (PV) graph view]
It is used for moving the PV display axis up/down of the PV
display axis in [6.2 Measurement data (PV) graph view]
Summary of Contents for 3ch series
Page 1: ...Instruction Manual ...
