Samsung Ubigate iBG2016, Configuration Manual

Page: 726 / 744

CHAPTER 11. Management
672
© SAMSUNG Electronics Co., Ltd.
Voice Protocol Module debug mode
This is the function that shows debug messages of the layer close by a device
on ports side.
There are parameters of in/out/all that set up Incoming/Outgoing, and
deb0/deb1/info/all that set up levels.
Table 11.12 Voice Protocol Module Debug
Command Purpose
Debug vpm asi Analog Sub Interface debug
Debug vpm ati Analog Trunk Interface debug
Debug vpm dti Digital Trunk Interface debug
Debug vpm ssi Signal Interface
H323 debug mode
This is the function that shows a debug message of H323, and shows the
contents of stack and call-control.
Log displays an appropriate calling number and called number, All displays a
debug message regardless of calling/called number.
Table 11.13 H323 Debug
Command Purpose
Debug h323 stack h323 stack related command
Debug h323 vcc h323 Voice Call Control related command
Debug h323 log h323 calling or called number log related
command
SIP debug mode
This is the function that shows a debug message of SIP, and shows the
contents of stack and call-control.
Dump is the function that shows a SIP message.
Log displays an appropriate calling number and called number, All displays a
debug message regardless of calling/called number.