Samsung Ubigate iBG2016, Configuration Manual

Page: 617 / 744

Ubigate iBG2016 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
563
Configuring Inclusion of the Sending Complete
Information Element
In some geographic locations, such as Hong Kong and Taiwan, ISDN switches
require that the Sending Complete information element be included in the
outgoing Setup message to indicate that the entire number is included.
This information element is generally not required in other locations.
To configure the interface to include the Sending Complete information
element in the outgoing call Setup message, use the following command in
interface configuration mode:
Step Command Purpose
1 configure terminal Configures to set up bundle.
2 interface bundle
bundle-name
Sets up bundle name.
3 link [pri_t1|pri_e1]
0/0/0:1
Sets up the pertinent physical link.
4 isdn Sets up ISDN
5 switch-type switch-type Sets up the pertinent switch-type with the
content like the following table.
6 incoming-voice Sets up for voice.
7 sendling-complete Includes the Sending Complete information
element in the outgoing call Setup message...
8 activate Activates ISDN.