Samsung Ubigate iBG2016, Configuration Manual

Page: 675 / 744

Ubigate iBG2016 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
621
(Continued)
Step Command Purpose
5 fax error-correction-mode
Example)
/configure/dial-peer/voice/voip 1000#fax
error-correction-mode
enables fax-relay Error
Correction Mode(ECM). to
disable ECM, use ‘no fax
error-correction-mode’
command
6 exit
Example)
/configure/dial-peer/voice/voip 1000#exit
Exits the current mode
4.
‘fax protocol t38’ command in ‘voice-service configuration’ mode
y
Configuration Steps
−
configure terminal
−
voice service voip
−
fax protocol t38
−
fax rate
−
fax error-correction-mode
−
exit
y
Detailed Steps
Step Command Purpose
1 configure terminal
Example)
# configure terminal
Enters global configuration mode.
2 voice service voip
Example)
/configure#voice service voip
Enters voice-service configuration
mode.
3 fax protocol t38
Example)
/configure/voice/service/voip#fax
protocol t38 redundancy 0 fallback
pass-through-g711ulaw
specifies T.38 for fax relay with VoIP.
- redundancy: specifies the number
of redundant T.38 fax packets to
be sent
- fallback: {none |
pass-through-g711alaw |
pass-through-g711ulaw }