Samsung Ubigate iBG2016, Configuration Manual

Page: 688 / 744

CHAPTER 9. Extended VoIP Services
634
© SAMSUNG Electronics Co., Ltd.
Configuring Services
Ubigate iBG2016 does not require a user to set up separately for services of
survivable telephony mode. In the Call Manager Interworking mode, it
controls services on the basis of subscriber profiles downloaded from Call
Manager. But, same as in Call Manager Interworking mode, for CLID Service
enable the function that transfers a Caller Id to a FXS phone in FXS voice-port.
How to Configure Voice-Port for CLID
To enable the Caller Id function in FXS voice-port follow the below procedures.
y
Configuration Steps
−
configure terminal
−
voice-port
−
caller-id enable
−
exit
y
Detailed Steps
Step Command Purpose
1 configure terminal
Example)
# configure terminal
Enters global configuration mode.
2 voice-port slot/subslot/port
Example)
/configure# voice-port 0/1/2
Enters Voice-Port configuration
mode.
3 [no] caller-id enable [type1 | type2]
Example)
/configure/voice-port(0/1/2)# caller-id
enable type1
Enables or Disables caller-id
feature.
4 Exit
Example)
/configure/voice-port(0/1/2)# exit
Exits the current mode