Samsung Ubigate iBG2016, Configuration Manual

Page: 528 / 744

CHAPTER 5. Analog Voice Port
474
© SAMSUNG Electronics Co., Ltd.
(Continued)
Step Command Purpose
14 destination-pattern WORD
Example)
/configure# voice-port>
destination-pattern 1004
Setting Destination-pattern
Matches dialed digits to a telephony device.
The string argument is a series of digits that
specify the E.164 or private dialing plan
telephone number.
Valid entries are the numbers 0 through 9
and the
letters A through D.
You can also enter the following special
characters:
- The asterisk(*) or pound sign (#) on
standard touch-tone dial pads can be used
anywhere in the pattern.
- The period (.) acts as a wildcard character.
When the timer(T) character is included at
the end of the destination pattern, the
router collects dialed digits until the
interdigit timer expires(5 seconds, by
default) or until you dial the termination
character(the default is #). The timer
character must be a capital T.
15 port slot/subslot/port Maps the dial peer to a specific Port Number
16 exit Exits voice dial-peer configuration mode