Samsung Ubigate iBG2016, Configuration Manual

Page: 161 / 744

Ubigate iBG2016 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
125
(S,G,rpt) Entries: 0
(*, 224.0.1.3)
RP: 10.10.1.5
RPF nbr: 172.16.1.2
RPF idx: ethernet 2/1
Upstream State: JOINED
Local ................................
Joined j...............................
Asserted ................................
Outgoing o...............................
At Router_E, Ethernet 2/1 is the incoming interface of the(*, G) entry, and
Ethernet 1/1 is on the outgoing interface list of the(*, G) entry. This means
that there is a group member through Ethernet 1/1, and RP is reachable
through Ethernet 2/1.
The 0 position on this 32-bit index is for Ethernet 1/1(as illustrated in the
interface display above). The j on the 0 index indicates that the Join has come
from Ethernet 1/1.
Since Router_C is the RP, and the root of this multicast tree, the show ip pim
sparse-mode mroute command on Router_C shows RPF nbr as 0.0.0.0 and
RPF idx as none.
Router_C# show ip pim sparse-mode mroute
IP Multicast Routing Table
(*,*,RP) Entries: 0
(*,G) Entries: 1
(S,G) Entries: 0
(S,G,rpt) Entries: 0
(*, 224.0.1.3)
RP: 10.10.1.5
RPF nbr: 0.0.0.0
RPF idx: None
Upstream State: JOINED
Local ................................
Joined j...............................
Asserted ................................
Outgoing o...............................