Samsung SCX-4520 User Manual Download

Page: 197 / 322

AINTENANCE

8.18

In the Select Notification section

In this section, you can select various settings.
•

Consumable Shortage Warning

: select

Off

not to send the

consumable shortage warning mail or

After the remaining

level is approximately 20%

to send e-mail when the

remaining items are almost at the end of their life.

OTE

: Remaining level will follow in system and there is a

possibility this percentage being different.

•

Consumable Status Report

: select

Off

not to send the

consumable status report mail or

Every 1000 pages

to send

e-mail after printing 1000 pages. The mail contains

information about firmware version, toner count and

currently installed option.

•

Alert System Error

: check the option you want to know

when error occurs.

Summary of Contents for SCX-4520



































































































































































































































































































































Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands

Samsung SCX-4520, User Manual

Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands