Samsung SCX-4520 User Manual Download

Page: 62 / 322

ETTING

TARTED

2.29

Installing Samsung Software

OTES

• Cancel the “New Hardware Found” window when your computer

boots up.

• Make sure that your machine is turned on and connected to your

computer’s parallel port or USB port

before installing

software

. Windows 95 and Windows NT 4.0 do not support the

USB connection.

Insert the supplied CD-ROM into your CD-ROM drive.

The CD-ROM should automatically run, and an installation

window appears.

If the installation window does not appear, click

Start

and

then

Run

. Type

X:Setup.exe

, replacing “

” with the letter

of your drive and click

OTE

: If your machine is not already connected to the computer,

when the following window opens, connect your machine to the

computer and turn the machine on. Then click

Next

If the machine is already connected and turned on, this screen will

not appear. Skip to the next step.

Summary of Contents for SCX-4520



































































































































































































































































































































Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands

Samsung SCX-4520, User Manual

Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands