Samsung SCX-4520 User Manual Download

Page: 171 / 322

AXING

(SCX-4720F/4720FS O

NLY

)

7.32

Press the scroll button ( or ) to display “Priority Fax” on
the bottom line and press

Enter

Enter the number of the receiving machine using the
number keypad.

To enter the number, you can use one-touch keypad, speed

dial, or group dial numbers. For details, see “Automatic

Dialing” on page 7.19.

Press

Enter

to confirm the number. The display asks you to

enter a name.

To assign a name to the transmission, enter the name you
want. For details about entering characters, see page 2.17.

If you do not want to assign a name, skip this step.

Press

Enter

The document is scanned into memory before transmission.

The display shows memory capacity and the number of

pages being stored in memory.

For a document placed on the document glass, the display

asks if you want to load another page. Select “1.Yes” to

add. Otherwise, select “2.No.”

The machine shows the number being dialed and begins
sending the document.

Summary of Contents for SCX-4520



































































































































































































































































































































Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands

Samsung SCX-4520, User Manual

Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands