Samsung SCX-4520 User Manual Download

Page: 284 / 322

SING

OUR

ACHINE

ETWORK

Setting Network Protocols

When you first install the machine, all supported network

protocols are enabled when you turn the machine on. If a

network protocol is enabled, the machine may actively transmit

on the network even when the protocol is not in use. This may

increase network traffic slightly. To eliminate unnecessary

traffic, you can disable unused protocols.

Press

Menu

until you see “Network Setup” on the top line

of the display.

Press the scroll button ( or ) until “Config Network”

displays on the bottom line.

Press

Enter

to access the menu.

Press the scroll button ( or ) until you see the desired

protocol on the bottom line.

Press

Enter

If you selected “TCP/IP,” assign a TCP/IP address. For

details, see page D.8.

If you selected “EtherTalk,” press the scroll button ( or )

to change the setting to “On” (enable) or “Off” (disable).

This menu is only available when you machine is SCX-

4520S/4720FS.

If you selected “NetWare”, set the frame type format. For

details, see page D.10.

Press

Enter

to save the selection.

Press

Stop/Clear

to return to Standby mode.

Summary of Contents for SCX-4520



































































































































































































































































































































Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands

Samsung SCX-4520, User Manual

Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands