Samsung SCX-4520 User Manual Download

Page: 195 / 322

AINTENANCE

8.16

Setting E-mail Notification

This feature allows you to know your machine’s status through

your e-mail. To set E-mail Notification, you need to enter some

information in the SyncThru Web Service.

In the Web Browser address bar, enter your machine’s IP

address you assigned. Then the SyncThru Web Service opens. It

is consist of the Information, Machine Setup, Network Settings,

Maintenance and support tabs.

Setting the Machine Setup tab

Select the

Machine Setup

tab and then configure the E-mail

Notification option.

You may see the following window.

In the Server Information section

In this section, you can enter your machine’s network

information.
•

IP Address or Host Name

: select IP Address or Host Name.

you select host name, you need to enter your DNS setting

the TCP/IP of Network Settings tab.

•

SMTP Server and Port

: enter your SMTP Server Host name

or SMTP Server IP address and port that

will be used to

connect to the SMTP Server. Port is from 1 to 65535. The

Default Value is 25.

Summary of Contents for SCX-4520



































































































































































































































































































































Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands

Samsung SCX-4520, User Manual

Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands