Samsung SCX-4520 User Manual Download

Page: 20 / 322

xix

Replacing the Fitted Plug (for UK Only)

MPORTANT

The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and

has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct

13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover,

do not use the plug until you have another fuse cover.

Please contact the people from you purchased the machine.

The 13 amp plug is the most widely used type in the UK and should be suitable.

However, some buildings (mainly old ones) do not have normal 13 amp plug sockets.

You need to buy a suitable plug adaptor. Do not remove the moulded plug.

ARNING

If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric shock if you plug

it into a socket.

MPORTANT

WARNING

: You must earth this machine.

The wires in the mains lead have the following color code:
• Green and Yellow:

Earth

• Blue: Neutral
• Brown: Live

If the wires in the mains lead do not match the colors marked in your plug, do the

following:

You must connect the green and yellow wire to the pin marked by the letter “E” or by

the safety ‘Earth symbol’ or colored green and yellow or green.

You must connect the blue wire to the pin which is marked with the letter “N” or

colored black.

You must connect the brown wire to the pin which is marked with the letter “L” or

colored red.

You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.

Summary of Contents for SCX-4520



































































































































































































































































































































Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands

Samsung SCX-4520, User Manual

Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands