Samsung SCX-4520 User Manual Download

Page: 287 / 322

SING

OUR

ACHINE

ETWORK

D.10

Configuring IPX Frame Types

On IPX/SPX protocol networks (for example, Novell NetWare),

the format of the network communication frames must be

specified for the machine. In most cases, you can keep the

“Auto” default setting. However, you can manually set the frame

type format, if required.
•

Off

: The IPX/SPX protocol is disabled.

•

Auto

(default): Automatically senses and limits the frame

type to the first one detected.

•

Enable 802.3

: Limits the frame type to IPX over IEEE 802.3

frames. All others will be discarded.

•

Ethernet II

: Limits the frame type to IPX over Ethernet

Frames. All others will be discarded.

•

Enable 802.2

: Limits the frame type to IPX over IEEE 802.2

with IEEE 802.3 frames. All others will be discarded.

•

Enable SNAP

: Limits the frame type to IPX over SNAP with

IEEE 802.3 frames. All others will be discarded.

Take the following steps to change the frame type format:

Press

Menu

until you see “Network Setup” on the top line

of the display.

Press the scroll button ( or ) until “Config Network”

displays on the bottom line.

Press

Enter

to access the menu.

Press the scroll button ( or ) until “NetWare” displays on

the bottom line. Press

Enter

The first available menu item, “Off,” displays on the bottom

line.

Press the scroll button ( or ) until you see the desired

frame type and press

Enter

Press the

Stop/Clear

to return to Standby mode.

Summary of Contents for SCX-4520



































































































































































































































































































































Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands

Samsung SCX-4520, User Manual

Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands