Samsung SCX-4520 User Manual Download

Page: 78 / 322

APER

ANDLING

3.5

The paper level indicator on the front of the paper tray shows

the amount of paper currently left in the tray. When the tray is

empty, the indicator of the bar is completely lowered.

To load paper, pull open the paper tray and load paper with the

side to be printed on face down.

You can load letterhead paper with the design side face down.
The top edge of the sheet with the logo should be placed at the

front of the tray.

For details about loading paper in the paper tray, see “Loading

Paper” on page 2.7.

OTES

• If you experience problems with paper feed, place one sheet at a

time in the Multipurpose tray.

• You can load up to 150 sheets of previously printed paper. The

printed side should be facing up with an uncurled edge at the

front. If you experience problems with paper feed, turn the paper

around. Note that the print quality is not guaranteed.

Paper empty

Paper full

Summary of Contents for SCX-4520



































































































































































































































































































































Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands

Samsung SCX-4520, User Manual

Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands