Samsung SCX-4520 User Manual Download

Page: 188 / 322

AINTENANCE

8.9

Unpack the new toner cartridge and gently roll it
horizontally 5 or 6 times to distribute the toner evenly

inside the cartridge.

Save the box and the plastic bag for shipping.

OTE

: If toner gets on your clothing, wipe it off with a dry cloth

and wash clothing in cold water. Hot water sets toner into fabric.

AUTION

: Do not touch the green underside of the toner

cartridge. Use the handle on the cartridge to avoid touching this

area.

Hold the toner cartridge by the handle. Slowly insert the
cartridge into the opening in the machine. Tabs on the

sides of the cartridge and corresponding grooves within the

machine will guide the cartridge into the correct position

until it locks into place completely.

Close the front door.

Groove

Tab

Summary of Contents for SCX-4520



































































































































































































































































































































Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands

Samsung SCX-4520, User Manual

Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands