Samsung SCX-4520 User Manual Download

Page: 58 / 322

ETTING

TARTED

2.25

Press

Enter

to save the selection.

To return to Standby mode, press

Stop/Clear

Scan Lamp Save Mode

Scan Lamp Save mode allows you to save the scan lamp. The

scan lamp under the document glass automatically turns off

when it is not in actual use to reduce power consumption and

extend the life of the lamp. The lamp automatically wakes up

after some warm-up time when you start scanning.

You can set the length of time for which the scan lamp waits

after a scan job is completed before it switches to the power

save mode.

Press

Menu

until “Machine Setup” appears on top line of

the display.

Press the scroll button ( or ) until “Scan PWR Save”
appears on the bottom line. Press

Enter

Press the scroll button ( or ) until the time setting you
want appears on the bottom line.

The available time options are 0.5, 1, 4, 8, and 12 (hours).

Press

Enter

to save the selection.

To return to Standby mode, press

Stop/Clear

Summary of Contents for SCX-4520



































































































































































































































































































































Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands

Samsung SCX-4520, User Manual

Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands