232
•
Program Mode
Sam4POS 6600/4800II Program Manual v2.12
KP Group (v1.0.80 and Later)
The KP Group programming was changed beginning at v1.0.80 and later. Use this programming area
to determine the KP Groups that will be used for assignment in the PLU Status Group programming.
You can assign KP Groups to different printers at different time periods if desired.
Note:
You must create a KP printer in the Device Mapping before you can create a KP Group.
Note:
KP Time Periods must be created prior to assignment here.
1.
From the
Program Mode/Device
menu, select
KP GROUP
from the available selections.
•
Alternately, you can press the drop-down arrow on the
/DEVICE MAPPING
screen
to view the sub menu selections; then select KP GROUP from the selections.
2.
The
KP GROUP
program screen is displayed:
3.
From the
KP GROUP
programming screen press the
icon in the left column to add a new KP
Group(s) or select a KP Group list.
4.
INPUT DESCRIPTION
(up to 30 characters) for the KP Group and press
OK
to close the dialog or
press OK AND CONTINUE to add additional KP Groups. Press CANCEL if you wish to exit the add
KP Group without adding the group.
5.
After the KP Groups are created, press the
icon in the center column to assign the printer to be used
for the KP group and selected the time period for the group.
6.
When the printer and time period are selected, the
KP OPTION
selections are displayed.
Summary of Contents for SAM4POS
Page 10: ...10 Introduction Sam4POS 6600 4800II Program Manual v2 12...
Page 169: ...Sam4POS 6600 4800II Program Manual v2 12 Program Mode 169 Text Font Styles...
Page 267: ...Sam4POS 6600 4800II Program Manual v2 12 Program Mode 267...
Page 276: ...276 Program Mode Sam4POS 6600 4800II Program Manual v2 12 Log Backup Example...
