Sam4s SAM4POS, Program Reference Manual, Page: 220 / 350

220
•
Program Mode Sam4POS 6600/4800II Program Manual v2.12
Scanner
Serial scanners can be used with the SAM4POS terminal, program the port setting to match the scanner settings,
Alternately, a USB scanner can be connected to the terminal; a USB scanner would require no port
programming, simply plug in the USB scanner.
General
DEVICE MODEL
General Scanner
COMMUNICATION TYPE
Serial
Serial
COM PORT
COM1 thru COM3
/dev/ttyUSB0 – only available when a USB to RS-232 converter is connected to the terminal.
BAUD RATE
1200, 2400, 9600, 19200, 38400, 57600,
115200
DATA BITS
7 or 8
PARITY
NONE, EVEN, ODD
STOP BITS
1 or 2
FLOW CONTROL
NONE, XON_XOFF (S/W), RTS_CTS (H/W)
Line Display
Add all line displays
(customer displays)
utilized in the system.
Note: You can edit the line display message from PROGRAM MODE \ OPTIONS \ OPTIONS \ GENERAL
OPTIONS \ ETC \ Line Display Description
General
DEVICE MODEL
SAM4S CDP or SAM4S ML700
COMMUNICATION TYPE
Serial
Serial
COM PORT
COM1 thru COM3
/dev/ttyUSB0 – only available when a USB to RS-232 converter is connected to the terminal.
BAUD RATE
1200, 2400, 9600, 19200, 38400, 57600,
115200
DATA BITS
7 or 8
PARITY
NONE, EVEN, ODD
STOP BITS
1 or 2
FLOW CONTROL
NONE, XON_XOFF (S/W), RTS_CTS (H/W)