Initial Operation · Connecting the Telephone Cable
15
EN
CONNECTING THE TELEPHONE
CABLE
Connecting the Telephone Cable
Connect the telephone cable to the device by insert-
ing it in the socket designated with
FAX/Ñ
(RJ-11-
Connector). Insert the telephone plug into your PTT
line socket.
Telefonkabel anschließen
Connection to an ISDN system!
PABX Systems 1
CONNECTING THE NETWORK
CABLE
Connecting the Network Cable
Insert the network cable (RJ-45) into the
LAN
socket
on the rear side of the device. Connect the other end
to the router of your network .
LAN-Kabel anschließen
CONNECTING THE MAINS
CABLE
Mains Voltage at the Site of Installation
1 Insert the mains cable into the connection located
on the rear side of the device. Plug the power
cable into the electrical outlet.
2 Switch the device on using the on/off switch on
the rear.
Spaltenumbruch
CAUTION!
CONNECTION TO AN ISDN SYSTEM!
You can not connect your devices directly to
the digital output of the ISDN system.
Details for ISDN connections can be found
in the instructions provided with the termi-
nal adapter or the dial-up router.
Notice
CONNECTION TO PRIVATE AUTOMATIC
BRANCH EXCHANGE
If you connect your device as extension to a
telephone system, you must set it for work-
ing as an extension (also see Chapter
Tele-
phone Lines and Additional Devices
, page
69
).
CAUTION!
MAINS VOLTAGE AT THE SITE OF INSTAL-
LATION!
Check whether the mains voltage of your
device (indicated on the type label) matches
the mains voltage available at the setup
location.
