6
Sagemcom · MF 5591dn
EN
USB STORAGE MEDIA
Only use storage media that are compatible with the device.
Only use storage media that are compatible with the
device. Ensure that the power of a USB device does
not exceed the permitted amp limit of the USB con-
nection. You can only connect
one
high power device
(USB 2.0) to each USB connection. Do not connect
additional devices—such as batteries, fans, charging
devices—to your machine. The device only recognises
storage media which are formatted with
FAT16
or
FAT32
.
NTFS
is not supported.
Never pull out the storage medium while the device is accessing it.
Never pull out the storage medium while the device
is accessing it. This could cause data to be damaged
or lost.
Updating Firmware
When carrying out a Firmware update only use the
Firmware file for your device from the website:
www.sagemcom.com. Using other Firmware files can
lead to your device not functioning properly. Sagem-
com accepts no liability for device malfunctions
which can be traced back to the use of third party
Firmware.
GPL Text
The firmware running on the device is partly licensed
under GPL. If you have any questions about the
licensing of a specific part of the firmware, feel free
to contact us on the email address: support.serv-
[email protected]. We can send you a CD contain-
ing the relevant source code for the cost of produc-
tion.
CONSUMABLE MATERIALS
Original Consumable Material
Use only original consumable materials. These are
available from a specialised retailer or through our
order service (see back side of this user manual).
Other consumable materials could damage the
device or shorten its service life.
Environment
Dispose of old consumable materials according to
the waste regulations of your country.
Caution when Handling Toner Powder:
Caution when Handling Toner Powder:
If you breathe in toner powder, go into the fresh air
immediately. Call a doctor immediately!
If you get toner powder in your eyes, rinse them with
a lot of water for at least 15 minutes. Call a doctor
immediately!
If you have swallowed toner powder, drink small
amounts of water. Try
NOT
to vomit. Call a doctor
immediately!
Toner Cartridge 1
Never open a toner cartridge. Store both new and
used cartridges in a place where they will not come
into the hands of children.
Paper Jam
In case of a paper jam, remove the paper carefully out
of the device. Throw the paper away carefully: It is
possible that the toner may not be completely set on
the print-out, and toner dust could be released into
the air.
If toner dust is released into the air, you should avoid allowing it to contact your skin and eyes.
If toner dust is released into the air, you should avoid
allowing it to contact your skin and eyes. Do not
inhale the released toner dust. Remove the toner
dust from clothing or objects with cold water; hot
water would only cause the toner to set. Never
remove loose toner dust with a vacuum cleaner.
REPAIRS
Danger—Heat!
The fuser unit and and its surroundings inside the
device become hot during operation. Do not touch
these parts if you have opened the device. Proceed
with care when you are removing a paper jam for
instance.
Display
Should disruptions occur, follow the instructions on
the display and on the error report.
Repairs
Do not make any repairs to the device yourself.
Improper maintenance can result in injuries or dam-
age to the device. Only have your device repaired by
an authorised service centre.
Do not remove the type label from your device; this
would void the warranty.
LASER SAFETY
Laser Safety
With specific reference to lasers, the equipment
complies with laser product performance standards
set by governmental, national, and international
agencies as a Class 1 Laser Product. It does not emit
hazardous light, as the beam is totally enclosed dur-
ing all phases of customer operation and mainte-
nance.
Direct (or indirect reflected ) eye contact with the
laser beam might cause serious eye damage. Safety
precautions and interlock mechanisms have been
designed to prevent any possible laser beam expo-
sure to the operator. Only a qualified service techni-
cian should open the device and carry out service
operations.
Class 1 Laser Product
Ã
Class 1 Laser Product
