Initial Operation · Removing Packaging Material
13
EN
3 Remove the toner cartridge by gripping the handle
in the middle and pulling it forwards out of the
device
4 Remove the tape and protective paper,
but do not
remove the protective strip from the cartridge yet
.
5 Shake the new toner cartridge back and forth sev-
eral times in order to distribute the toner evenly,
thereby improving the print quality.
6
Only after
completely pull off the protection strip
located on the left side of the cartridge.
7 Place the toner cartridge into your device. The
cartridge should snap securely into position.
8 Close the device.
9 Close the upper device cover.
DANGER!
ESCAPING TONER DUST!
Never open a toner cartridge. If toner
dust is released into the air, you should
avoid allowing it to contact your skin
and eyes. Do not inhale the released
toner dust. Remove the toner dust from
clothing or objects with cold water; hot
water would only cause the toner to set.
Never remove loose toner dust with a
vacuum cleaner.
DANGER!
ESCAPING TONER DUST!
Once you have removed the protection
strip, do not shake the toner cartridge
any more. Otherwise, it is possible that
toner dust will be released into the air.
CAUTION!
TONER CARTRIDGE NOT INSERTED
CORRECTLY!
If the device cover would not close, the
toner cartridge is not inserted correctly.
Take the toner cartridge out and insert it
again correctly.
