30
Sagemcom · MF 5591dn
EN
8 Push the paper tray into the device all the way to
the stopping point.
LOAD PAPER INTO THE
MANUAL PAPER FEED
1 Press
C
,
202
and
OK
.
2 Select the manual paper feed using
[
.
3 Confirm with
OK
.
4 Load the paper into the manual paper feed on the
front of the device.
5 Enclose the paper with the two side paper guides.
Be sure not to enclose it so tightly that it bends.
Reset Settings
LOADING ENVELOPES
Loading Envelopes
You can print on envelopes directly using the manual
paper feed.
Unsuitable Envelopes!
1 Load the envelope into the manual paper feed on
the front of the device. The short edge must face
the direction of the device. The side which is to be
printed should lay face up. The envelope flap must
be face down on the left hand side.
2 Enclose the envelope with the two side paper
guides. Ensure that the envelope is not inserted so
tightly that it bends.
INSERTING SLIDES AND
LABELS
Inserting Slides and Labels
Use slides which are designed for copiers and laser
printers as they must stand up to high temperatures
and printing. The printing side is usually somewhat
rougher than the reverse side.
You can insert slides and sheets of labels into the
paper tray and into the manual paper feed. It is pref-
erable to use the manual paper feed for printing on
this print media (see also chapter on
Load Paper into
the Manual Paper Feed
, page 30).
Unsuitable Slides and Labels!
CAUTION!
RESET SETTINGS
Reset the standard setting again after the
print job so that the paper feed from the
paper tray is guaranteed for incoming fax
transmissions.
CAUTION!
UNSUITABLE ENVELOPES!
Do not use envelopes with self-adhesive
flaps, window envelopes or envelopes with
metal fasteners.
CAUTION!
UNSUITABLE SLIDES AND LABELS!
Do not use slides which are designed for
manual inscription or for an overhead pro-
jector. These slides can melt in the device
and damage it.
Use sheets of labels for use in laser print-
ers. The labels must cover the entire sheet
otherwise they could peel off in the device.
