Companion Center SFX · Installing the Driver and Software
19
EN
6
Only after
the restart, connect the device to your
PC with a typical USB cable. The USB port of your
device can be found on the rear side.
7 Your device is detected as a new peripheral device
and registered.
8 If your operating system is Windows XP (Service
Pack 2), an additional window will appear during
the final installation. Select
No, not this time
, and
click on
Next
.
9 Under Windows XP, select
Install software auto-
matically
during the final installation and click on
Next
.
Notice
ONLY HIGH-SPEED CERTIFIED USB CA-
BLE
Use only a custom high speed certified
USB cable to connect the device to your
computer. The cable should be no longer
than 1.5 metres.