SAFWAY Huennebeck MANTO G3, User Manual

Page: 33 / 224

33
Unless stated otherwise, all dimensions are given in mm.
MANTO®
*only rental **no longer produced
Component Part code Weight [kg]
Project-related
production
Platform Beam 350 - 400
Platform Beam 300 - 350
Platform Beam 250 - 300
Platform Beam 200 - 250
Platform Beam 150 - 200
Platform Beam 125 - 150
The Platform Beam is not adjustable and
is made to suit the application. Main beam
of a shaft platform, equipped with flexible
supports that automatically click into place
during lifting operations. The timber con-
struction and the platform decking are to
be provided on site.
Platform Beams < 1.25 m are available on
request.
Not for rental.
Refer to page 189.
410931
410920
410910
410909
410894
410883
122.20
108.80
95.40
82.00
68.60
55.20
150
100
200
Box-out
Provides the recess in the shaft wall for the
Platform Beam. Due to its tapered shape,
the Box-out can be recovered and, if in
good condition, reused.
Refer to page 189.
410942 2.60
100
49
55
32
Thread
M 24
Thread
DW 15
A-Tie Cone M24/DW 15
Steel cone for suspended scaffolds. The
front connection is equipped with an M24
thread and the rear side with a DW 15 con-
nection for tie rods.
The cone is reusable. Remove it from
the concrete using an Allen key w.a.f. 24.
(code:542471).
Refer to page 192.
496664 0.65
The A-Tie Cone M24/DW 15 must be provided with an adequate anchoring design for
the site conditions. Details can be found in the German technical approval T-211.6-1854.
150
120
154
V
KB Supporting Part
The KB Supporting Part is used to support
the Platform Beams. The KB Supporting
Part is secured with the Fit Bolt M24x70Z
8.8 and the A-Tie Cone M24/DW 15.
SWL (V): 22.50 kN.
Refer to page 192.
600338 5.81