107
Unless stated otherwise, all dimensions are given in mm.
MANTO®
Fixing of the PLATINUM 100 Tie Nut Advancing Side
Fixing screw
Pin clip
9.3.2 Preparing closing side
The PLATINUM 100 Tie Nut Closing Side is hooked into the relevant tie point on the
back of the formwork panel and screwed tightly with the fixing screw to the panel
frame.
Fixing of the PLATINUM 100 Tie Nut Closing Side
Fixing screw
Top
Holder for tie rod
Before assembling the formwork, the PLATINUM 100 tie rods can be adjusted to the
correct length to suit the wall thickness.
Preparing the tie rod differs depending on the generation of the tie rod. The prepara-
tion of the tie rod G1 is described below, after which the preparation of the tie rod G2 is
shown.
Summary of Contents for Huennebeck MANTO G3
Page 1: ...MANTO Large frame panel formwork User guide...
Page 9: ...9 Unless stated otherwise all dimensions are given in mm MANTO...
Page 61: ...61 Unless stated otherwise all dimensions are given in mm MANTO MANTO G3 M MANTO G3 M...
Page 219: ...219 Unless stated otherwise all dimensions are given in mm MANTO...
