164
Formwork restraint
Unless stated otherwise, all dimensions are given in mm.
14.2.6 Struts for formwork heights of more than 6.00 m
The BKS Strut in combination with the BKS Strut Connector can provide support for
formwork higher than 6.00 m.
End piece with swivel base plate
1150 - 1850
End piece without swivel base plate
1087 - 1787
Intermediate piece 370
Intermediate piece 240
α
N
See note regarding
strut joints.
See note regarding
strut joints.
See note regarding
strut joints.
Each strut joint requires 4no. M16x60 10.9.
The maximum strut loads for the connection to vertical panels are dependant of the
distance of the strut connector to the panel edge and the inclination of the struts
(angle α above).
Props must be placed as near as possible to the vertical panel joint or the centre pro-
file. The correct type and size of the alignment strut has to be selected according to
the load, the formwork height and the extension length of the alignment strut.
Summary of Contents for Huennebeck MANTO G3
Page 1: ...MANTO Large frame panel formwork User guide...
Page 9: ...9 Unless stated otherwise all dimensions are given in mm MANTO...
Page 61: ...61 Unless stated otherwise all dimensions are given in mm MANTO MANTO G3 M MANTO G3 M...
Page 219: ...219 Unless stated otherwise all dimensions are given in mm MANTO...
