181
Unless stated otherwise, all dimensions are given in mm.
MANTO®
Step 5
Place the upper MANTO Shaft Corner (
4
) on the lower MANTO Shaft Corner (
5
). Make
sure that the forkhead (6) fits over the adjustment nut of the lower MANTO Shaft Cor-
ner. Connect the legs of the MANTO Shaft Corners with 2no. Bolt M16x35 (with Nut) 8.8
(code:603623) (
7
). Tighten the bolts and nuts hand-tight.
4
5
6
7
Ensure that the MANTO Shaft Corners lie on top of each other without any gaps and
flush to each other.
Step 6
Insert an M16 × 60 Bolt (
8
) through the hole in the head of the hexagon nut and tighten.
Tighten the 2no. M16 × 35 bolts in the legs as well. The Shaft Corners are stacked.
8
Summary of Contents for Huennebeck MANTO G3
Page 1: ...MANTO Large frame panel formwork User guide...
Page 9: ...9 Unless stated otherwise all dimensions are given in mm MANTO...
Page 61: ...61 Unless stated otherwise all dimensions are given in mm MANTO MANTO G3 M MANTO G3 M...
Page 219: ...219 Unless stated otherwise all dimensions are given in mm MANTO...