SAFWAY Huennebeck MANTO G3, User Manual, Page: 190 / 224

190
Shaft formwork
Unless stated otherwise, all dimensions are given in mm.
16.5 Using the Platform Beam 200 - 300 Telescopic
The Platform Beam is adjustable in steps of 10 mm within a range of 1.0 m and can
cover openings in shafts. Depending on the support type of the platform beam, the pos-
sible clear width is between 2.00 m and 3.00 m when using the Box-out (code:410942)
or between 2.24 m and 3.24 m, when the KB Supporting Part (code:600338) is used.
The latch of the Platform Beam 200 - 300 Telescopic locks into the pocket created by
the Box-out or sits on the KB Supporting Part. The Box-out and the KB Supporting Part
can be removed after use.
The Platform Beam 200 - 300 Telescopic is provided with connections for timber
boards (supplied on site) and for a bottom platform if required.
max.: 3130
Min.: 2130
1000
104
415
415
Ø 60
Ø 14
Ø 26 Ø 21
Ø 14
Ø 14
1
2
3
4-5-6
7 - 8
170
Shackalah
List of (spare) parts:
1. KB Outer Beam 150
(code:600332)
2. KB Inner Beam 185
(code:600333)
3. KB Latch
(code:600331)
4. Bolt 30
(code:600334)
5. Washer 30
(code:600335)
6. Split Pin 8
(code:600336)
7. Locking Pin
(code:600337)
8. Spring Cotter Pin 4
(code:173776)
The Platform Beam 200 - 300 Telescopic (code:600330) is supplied as a full assembly,
complete with components 1 to 8.
The Safe Working Load (SWL) of the Platform Beam 200 - 300 Telescopic vary accord-
ing to the component used to support the beam on the wall. Two choices are available:
• KB Supporting Part
• Box-out
Safe Working Load (SWL)
Platform Beam 200 - 300 Telescopic (code:600330) and Latch-locked Platform Beam
Permitted structural values
End Support
KB Supporting Part (code:600338) Box-out (code:410942)
Permitted Bending Moment (M) 12.50 kNm
Permitted Support Reaction 22.50 kN 40.00 kN
SWL (edge of the shaft) 29.00 kN
SWL (middle of the shaft) 20.40 kN
WARNING
Warning!
Always use the same support at both ends of the beam and for all of the beams that
make a platform.