SAFWAY Huennebeck MANTO G3, User Manual, Page: 80 / 224

80
Height extensions up to 500 mm on site
Unless stated otherwise, all dimensions are given in mm.
7.3 Extensions up to 400 mm (with MANTO Aligning Panel Clamp)
Step 1 Use 2no. MANTO Aligning Panel Clamps ( B, code:448000) to attach a timber beam ( A )
to the top edge profile of the panel to be extended.
Step 2 Nail a second timber beam ( C ) to the upper arms of the MANTO Aligning Panel Clamps.
There are nail holes at the ends of the arms of the MANTO Aligning Panel Clamp to
accommodate the nails.
Step 3 Nail plywood ( D ), 21 mm thick and max. 400 mm high, to the timber beams.
B
max. 400
A
D
50–75
280
C
7.4 Extensions up to 500 mm (with Multipurpose Waler 100)
Step 1 Fasten the Multipurpose Waler 100 ( A , code:450764) to the uppermost H-rib on the
MANTO panels with the aid of Waler Spanners ( B , code:452053) and Tension Nuts ( C ,
code:197332) or with PLATINUM 100 Multi Bolts ( D , code:605810) and MANTO Tie Nuts
( E , code:464600).
Step 2 Nail 2no. timber beams ( F ) to the Multipurpose Waler 100. The Multipurpose Waler 100
has nail holes in the flanges.
Step 3 Nail plywood ( G ), 21 mm thick and max. 500 mm high, to the timber beams.
max. 500
B&C/D&E
F
G
max. 375
max.
200
A