189
Unless stated otherwise, all dimensions are given in mm.
MANTO®
16.4 Platform Beams
The latch-locked platform consists of Platform Beams with timber beams and boards on
top.
Gravity latches are attached to both ends of the double U-channel. They engage auto-
matically into the pockets created by the Box-outs or the KB Supporting Parts. The Box-
outs can be released from the bottom platform after the latch-locked platform is moved
and can be re-used.
Box-out
(code: 410942)
Timber beams and boards according
to specifications.
Crane sling
Latch
Connection point for
bottom platform
Latch-locked Platform Beam
The Platform Beam is produced specifically for each project.
For Safe Working Load, refer to the table on page 190.
Configuration limits
The following specifications apply to the Platform Beam 400:
• Maximum spacing of Platform Beams: 2.50 m centres
• Maximum height of the MANTO formwork: 5.40 m
• WLL of the bottom platform chains: 10.00 kN (alternatively Ø 15 mm tie
rods can be used)
• Permitted live load: Either for latch-locked or bottom platform P = 1.50 kN/m²
(alternatively: N = 1,0 kN point load)
• Minimum concrete strength: 15.00 N/mm
2
(for the supporting latches of the Platform
Beam).
Self-weights
• Formwork: 60.00 kg/m
2
(approx.)
• Latch-locked platform: 70.00 kg/m
2
(approx.)
• Bottom platform: 50.00 kg/m
2
(approx.)
10 mm height of latch
Latch-locked Platform Beam
Box-Out
(code:410942)
Gravity latch
120 mm height of beam
Summary of Contents for Huennebeck MANTO G3
Page 1: ...MANTO Large frame panel formwork User guide...
Page 9: ...9 Unless stated otherwise all dimensions are given in mm MANTO...
Page 61: ...61 Unless stated otherwise all dimensions are given in mm MANTO MANTO G3 M MANTO G3 M...
Page 219: ...219 Unless stated otherwise all dimensions are given in mm MANTO...
