118
Tying
Unless stated otherwise, all dimensions are given in mm.
9.5.1 FU Tightener
Step 1
The FU Tightener is positioned on the lower edge profile of the MANTO Panel and
secured to the rib by using the stirrup bolt.
Step 2
Cut a piece of the Punched Steel Tape to size and hook it to the FU Tightener. Tighten
the tape by turning the threaded bolt of the FU Tightener.
1
2
9.5.2 Edge Tie Fastener MR
Step 1
Slide the Edge Tie Fastener MR onto the edge profile of the MANTO panel.
Step 2
Place spreaders, e.g. timber beams, between the panels.
Step 3
Slide the tie rod through the Edge Tie Fastener MR and secure with MANTO Tie Nuts.
9.5.3 Alternative: PLATINUM 100 MANTO Bulkhead Clampdry tie (wall thickness 100 - 425 mm)
Step 1
Place spreaders, e.g. timber beams, between the panels.
Step 2
Attach the PLATINUM 100 MANTO Bulkhead Clamp to the edge profile on MANTO
panels.
Summary of Contents for Huennebeck MANTO G3
Page 1: ...MANTO Large frame panel formwork User guide...
Page 9: ...9 Unless stated otherwise all dimensions are given in mm MANTO...
Page 61: ...61 Unless stated otherwise all dimensions are given in mm MANTO MANTO G3 M MANTO G3 M...
Page 219: ...219 Unless stated otherwise all dimensions are given in mm MANTO...
