SAFWAY Huennebeck MANTO G3, User Manual, Page: 194 / 224

194
Assembling formwork
Unless stated otherwise, all dimensions are given in mm.
17 Assembling formwork
The following section shows the typical assembly of the MANTO wall formwork.
WARNING
Risk of injury from falling panels!
Do not stand or walk under suspended loads!
Apply release agent to the form sheets prior to lifting/pouring concrete. This makes it
easier to separate the formwork elements from the concrete.
17.1 Assembling formwork with one-sided tie system
How to assemble wall formwork with a one-sided tie system is described here. The ties
are operated from the advancing side.
When formwork is not stacked, tying can be done from the closing side in most cases.
When using stacked formwork, it is advisable to install the platforms on the advancing
side of the formwork and to tie from there.
The operator always has to decide on site which side offers the safest position for
operating the ties.
Assembling the formwork
Step 1 Assemble the advancing formwork on the ground, using timber beams or trestles, to
prevent damage to the components. Ensure enough clearance from the ground.
Step 2 Attach e.g. PLATINUM 100 Tie Nuts Closing Side (code:604197). Refer to section 8 or to
the design scheme for the correct number and position.